PreSonus Sceptre S6 (Per Pair)

High-Definition CoActual Active Studio Monitor

Hear the Difference

The first time you hear Sceptre-series CoActual™ 2-way studio monitors, you’ll discover fine nuances of your music that can’t be reproduced by conventional designs. The Sceptre’s panoramic soundstage, fine detail, and stunning dynamics will astonish you.

The Coaxial Conundrum

Coaxial designs offer the advantages of a single point source for a consistent acoustic center and a symmetrical dispersion pattern. But designing coaxial systems without acoustic anomalies has been extremely expensive—until now.

The Magic of TQ

Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic’s TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.

Monitor You Can Customize

Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.

Big Woof or Huge Woof

The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you’d expect for its size. The S8’s bass response is downright stunning.

Features

CoActual Technology

• Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging.
• Unique coaxial transducer integrates 6.5-inch (Sceptre S6) midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment.
• Powerful DSP provides critical Temporal Equalization™ with multiple FIR filters.

Acoustic-tuning controls

• HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB).
• Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB).
• High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope).
• Sensitivity (+4 dBu to -10 dBV).

Power and safety

• 180W RMS, Class D biamplification with internal heat sink.
• 102 dB maximum continuous SPL.
• RF shielding, current-output limiting, and over-temperature protection.
• Amplifier “soft start” feature eliminates popping on power-up.
• Internal power supply with IEC connector.
• Power switch with on/off LED.

Specifications

Inputs

1- Balanced XLR

1- BAlanced ¼” TRS

Frequency Response (-3 dB)

52 Hz - 20 kHz

Frequency Response (-10 dB)

42 Hz - 23 kHz

Crossover Freuency

2.2 kHz

LF Amplifier Power (@ 4Ω)

90W

HF Amplifier Power (@ 4Ω)

90W

Peak SPL (@ 1 meter)

109 dB

LF Driver

6.25” glass-reinforced paper

HF Driver

1” diaphragm compression driver

Input Impedance

10 kΩ

Volume Range

A-type taper

HF Control

Flat, +1, -1.5, -4 dB

Low Cut

Flat, 60, 80 Hz, 100 Hz

Acoustic Space

Flat, -1.5, -3, -6 dB

Protection

RF interference

Over-currrent

Over-voltage

Over-temperature

Turn-on/off transient

Subsonic filter External mains fuse

Power

100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

Vinyl-laminated, medium-density fiberboard

Physical

Width 9" (230 mm)

Depth 12.2" (310 mm)

Height 13.2" (335 mm)

Weight 18.8 lbs (8.53 kg)